Schneider Electric Mupgrade Utility Installationsanleitung PDF herunterladen (Seite 111)

System Logging

4–4 975-0720-01-01

This manual is for use by qualified personnel only

Polling Period

You can set the logging period in seconds using a drop-down menu. The

following logging periods are possible:

• 1 second (default setting)

• 2 seconds

• 5 seconds

• 10 seconds

•1 minute

• 10 minutes

• 1 hour

Logging Duration

The logging duration is specified in hours and minutes. A logging duration of

zero allows continuous logging until the Stop button is pushed.

Of course, a very long log file is not recommended as it can produce very large

files which may overload spreadsheet programs such as Excel. For long-term

logs, it is best to specify a logging duration and select an automatic restart.

Scheduled start

You can configure Conext Configuration Tool to start logging at a particular time

of day. This capability, along with logging duration is useful for recording solar

charge controller data during daylight hours. To enable Scheduled start, click the

Scheduled start checkbox. This opens the Scheduled start sub-tree and enables

the Time of day control to be updated.

To change the time of day, click the Time of day field and type or select the

desired time.

Automatic restart

For long-term logging, use the Automatic restart feature. Automatic restart can

work in two possible ways, depending on whether or not Scheduled start is set.

1. If Scheduled start is set, the next log starts at the same time the next day.

2. If Scheduled start is not set, the next log starts as soon as the last log has

finished processing. This provides a nearly, but not quite continuous, log.

There will be a bit of a time gap between data files. If the resultant log file is

being emailed or transmitted to an FTP repository then this gap may be

significant.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 129 130

Keine Kommentare

Schneider Electric Mupgrade Utility Installationsanleitung Seite 111