Schneider Electric Splitter Boxes Technical Information PDF herunterladen (Seite 31)

100

101

FTB IP67 Devices

31006709 2/2009 31

By default, pin 2 on each socket is configured to report diagnostics for the

associated sensor input. You may configure the settings on any of the channels so

that pin 2 supports an input by changing the Input/Diagnostic parameter

(see page 28) in the Advantys configuration software. The second input process

image register reports the information sent via pin 2 as follows.

When pin 2 on any channel is configured for diagnostics, its associated bit value in

the second register is interpreted as follows.

 A value of 1 indicates that there is no signal at pin 2; the associated red LED turns

on.

 A value of 0 indicates that there is a signal at pin 2; the associated LED is off.

The third input register reports common diagnostics, regardless of how the channels

are configured. A returned bit value of 1 indicates a detected problem.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 315 316

Kommentare zu diesen Handbüchern

Keine Kommentare

Schneider Electric Splitter Boxes Technical Information Seite 31

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Holzspalter Schneider Electric Splitter Boxes