Schneider Electric Mupgrade Utility Bedienungsanleitung PDF herunterladen (Seite 9)

Upgrading ION Device Firmware Using the Device Upgrader

5. Selectthedevice(s)youwanttoupgradefromSelectDevicesto Upgrade.To

selectmultipledevices,holddownCtrlwhileclickingeachdevice.

TheSave/RestoreFrameworkcheckboxisselectedbydefault.Thiskeepsa

copyofyourcurrentframeworktemplateduringtheupgrade.

CAUTION

If you uncheck the Save/Restore Framework check box, the current framework template for each selected

device is deleted when the firmware upgrade is complete, leaving no framework configuration in the

upgraded devices. Any custom frameworks you have on the device are also deleted.

If you intend to replace the meter’s framework configuration with a new template, it is recommended that

you upgrade via ION Setup. See “Upgrading Firmware Using ION Setup” on page 3 for information.

6. Ifyouareupgradingmultipledevices,specifyintheFailureHandlingareahow

theDeviceUpgraderrespondstoanunsuccessful upgrade:

 SelectHaltAftertospecifythenumberoffaileddevice upgradesthatcan

occurbeforeDeviceUpgraderstops.Bydefaul t,theutilityissettostopafter

thefirstfailedupgrade.

 SelectIgnoreAlltoattempttoupgra dealloftheselecteddevicesregardless

ofanyfailures.

7. IntheSelectRevisionsection,clickSelectFile.Navigatetotheupgrade(.upg)

filethatyouwanttouseandclickOpen.

Thisfilewillbedownloadedtoallthedevicesthatarehighlighted

intheSelect

DevicestoUpgradelist.

8. ClickUpgradetoupgradetheselecteddevice(s).

TheUpgradeStatus boxshowseachstageintheupgradeprocess,andthe

PercentCompletedbarindicatestheprogressofeachupgrade.Eachcompleted

upgradeisnotedintheUpgra deStatusbox.

Entertheme terpassword(s)whenprompted

todoso.

NOTE

If connection to the device is lost, or if power to the device is interrupted during an upgrade, restart the

Device Upgrade utility procedure.

9. DownloadandinstalltheIONsoftwareupdatesforyournewfirmwa re fromthe

website.

In this example, an

ION7300 Ethernet

card is the device

selected for upgrade.

Select the ION7300

meter that contains

the ION7300

Ethernet card that

will be upgraded.

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

Schneider Electric Mupgrade Utility Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Schneider Electric Mupgrade Utility